Grid-based Hybrid 3DMA GNSS and Terrestrial Positioning

The paper discusses the increasing use of hybridized sensor information for GNSS-based localization and navigation, including the use of 3D map-aided GNSS positioning and terrestrial systems based on different geometric measurement principles. However, both GNSS and terrestrial systems are subject to negative impacts from the propagation environment, which can violate the assumptions of conventionally applied parametric state estimators. Furthermore, dynamic parametric state estimation does not account for multi-modalities within the state space leading to an information loss within the prediction step. In addition, the synchronization of non-deterministic multi-rate measurement systems needs to be accounted. In order to address these challenges, the paper proposes the use of a non-parametric filtering method, specifically a 3DMA multi-epoch Grid Filter, for the tight integration of GNSS and terrestrial signals. Specifically, the fusion of GNSS, Ultra-wide Band (UWB) and vehicle motion data is introduced based on a discrete state representation. Algorithmic challenges, including the use of different measurement models and time synchronization, are addressed. In order to evaluate the proposed method, real-world tests were conducted on an urban automotive testbed in both static and dynamic scenarios. We empirically show that we achieve sub-meter accuracy in the static scenario by averaging a positioning error of $0.64$ m, whereas in the dynamic scenario the average positioning error amounts to $1.62$ m. The paper provides a proof-of-concept of the introduced method and shows the feasibility of the inclusion of terrestrial signals in a 3DMA positioning framework in order to further enhance localization in GNSS-degraded environments

Potentials of Deterministic Radio Propagation Simulation for AI-Enabled Localization and Sensing

Machine leaning (ML) and artificial intelligence (AI) enable new methods for localization and sensing in next-generation networks to fulfill a wide range of use cases. These approaches rely on learning approaches that require large amounts of training and validation data. This paper addresses the data generation bottleneck to develop and validate such methods by proposing an integrated toolchain based on deterministic channel modeling and radio propagation simulation. The toolchain is demonstrated exemplary for scenario classification to obtain localization-related channel parameters within an aircraft cabin environment

Toward UWB Impulse Radio Sensing: Fundamentals, Potentials, and Challenges

Radio sensing is a rapidly emerging research field. It focuses on designing an integrated communication system that can also perform localization and radar functionalities sharing the same transmit signals and potentially the same hardware. Ultra-wideband (UWB) impulse radio is a promising technology for radio sensing because it offers a high-range resolution and direct access to the channel impulse response (CIR) to observe the multipath components (MPCs) of the wideband channel caused by scattering at target objects. This approach enables a wide range of functionalities and applications, especially in the field of mobility and transportation. The foundation is given by the signal propagation and channel modeling of the UWB channel, which is briefly revisited in this chapter. Based on the CIR and estimated MPCs the target object can be localized like a multistatic passive radar. The influence of geometry in a passive target localization system is studied by calculating the geometric dilution of precision (GDOP). In addition to passive localization more tasks and functionalities of radio sensing, are briefly introduced including detection, tracking, imaging, counting, and classification. The chapter concludes with further research directions and challenges in UWB radio sensing, especially for real-world use in the context of mobility applications

An Empirical Study on V2X Enhanced Low-Cost GNSS Cooperative Positioning in Urban Environments

High-precision and lane selective position estimation is of fundamental importance for prospective advanced driver assistance systems (ADAS) and automated driving functions, as well as for traffic information and management processes in intelligent transportation systems (ITS). User and vehicle positioning is usually based on Global Navigation Satellite System (GNSS), which, as stand-alone positioning, does not meet the necessary requirements in terms of accuracy. Furthermore, the rise of connected driving offers various possibilities to enhance GNSS positioning by applying cooperative positioning (CP) methods. Utilizing only low-cost sensors, especially in urban environments, GNSS CP faces several demanding challenges. Therefore, this contribution presents an empirical study on how Vehicle-to-Everything (V2X) technologies can aid GNSS position estimation in urban environments, with the focus being solely on positioning performance instead of multi-sensor data fusion. The performance of CP utilizing common positioning approaches as well as CP integration in state-of-the-art Vehicular Ad-hoc Networks (VANET) is displayed and discussed. Additionally, a measurement campaign, providing a representational foundation for validating multiple CP methods using only consumer level and low-cost GNSS receivers, as well as commercially available IEEE 802.11p V2X communication modules in a typical urban environment is presented. Evaluating the algorithm&rsquo s performance, it is shown that CP approaches are less accurate compared to single positioning in the given environment. In order to investigate error influences, a skyview modelling seeking to identify non-line-of-sight (NLoS) effects using a 3D building model was performed. We found the position estimates to be less accurate in areas which are affected by NLoS effects such as multipath reception. Due to covariance propagation, the accuracy of CP approaches is decreased, calling for strategies for multipath detection and mitigation. In summary, this contribution will provide insights on integration, implementation strategies and accuracy performances, as well as drawbacks for local area, low-cost GNSS CP in urban environments. Document type: Articl

An Empirical Study on V2X Enhanced Low-Cost GNSS Cooperative Positioning in Urban Environments

High-precision and lane selective position estimation is of fundamental importance for prospective advanced driver assistance systems (ADAS) and automated driving functions, as well as for traffic information and management processes in intelligent transportation systems (ITS). User and vehicle positioning is usually based on Global Navigation Satellite System (GNSS), which, as stand-alone positioning, does not meet the necessary requirements in terms of accuracy. Furthermore, the rise of connected driving offers various possibilities to enhance GNSS positioning by applying cooperative positioning (CP) methods. Utilizing only low-cost sensors, especially in urban environments, GNSS CP faces several demanding challenges. Therefore, this contribution presents an empirical study on how Vehicle-to-Everything (V2X) technologies can aid GNSS position estimation in urban environments, with the focus being solely on positioning performance instead of multi-sensor data fusion. The performance of CP utilizing common positioning approaches as well as CP integration in state-of-the-art Vehicular Ad-hoc Networks (VANET) is displayed and discussed. Additionally, a measurement campaign, providing a representational foundation for validating multiple CP methods using only consumer level and low-cost GNSS receivers, as well as commercially available IEEE 802.11p V2X communication modules in a typical urban environment is presented. Evaluating the algorithm’s performance, it is shown that CP approaches are less accurate compared to single positioning in the given environment. In order to investigate error influences, a skyview modelling seeking to identify non-line-of-sight (NLoS) effects using a 3D building model was performed. We found the position estimates to be less accurate in areas which are affected by NLoS effects such as multipath reception. Due to covariance propagation, the accuracy of CP approaches is decreased, calling for strategies for multipath detection and mitigation. In summary, this contribution will provide insights on integration, implementation strategies and accuracy performances, as well as drawbacks for local area, low-cost GNSS CP in urban environments

Crochets de Poisson gradués et applications: structures compatibles et généralisations des structures hyperkählériennes

PALAISEAU-Polytechnique (914772301) / SudocSudocFranceF

Evaluation of Technology-Supported Distance Measuring to Ensure Safe Aircraft Boarding during COVID-19 Pandemic

With the rise of COVID-19, the sustainability of air transport is a major challenge, as there is limited space in aircraft cabins, resulting in a higher risk of virus transmission. In order to detect possible chains of infection, technology-supported apps are used for social distancing. These COVID-19 applications are based on the display of the received signal strength for distance estimation, which is strongly influenced by the spreading environment due to the signal multipath reception. Therefore, we evaluate the applicability of technology-based social distancing methods in an aircraft cabin environment using a radio propagation simulation based on a three-dimensional aircraft model. We demonstrate the susceptibility to errors of the conventional COVID-19 distance estimation, which can lead to large errors in the determination of distances and to the impracticability of traditional tracing approaches during passenger boarding/deboarding. In the context of the future connected cabin, a robust distance measurement must be implemented to ensure safe travel. Finally, our results can be transferred to similar fields of application, e.g., trains or public transport